110kV Zinc Oxide Lightning Arrestor (Station)

Specifications: 110kV
Normal operating conditions for Zinc Oxide Lightning Arrestor:
a) Ambient temperature no higher than +40℃, no less than -40℃
b) Above sea level no higher than 1000m (order should be indicated if used in tableland area)
c) Power frequency not less than 48HZ, and no higher than 62HZ
d) Continuous power frequency voltage loaded on lighting arrester no higher than continuous working voltage of lighting arrester
e) Utmost wind velocity no higher than 35 m/s
f) Area where earthquake intensity less than 7 degree

Messy area should be indicated
Technical Performance
Product performance conforms to National standard technical requirement of GB11032-2000(equal to IEC 60099-4)
Main Technical Parameters(Performance meet the GB11032~2000 eqvlEC60099-4)

Using Area		Station(Z)
Product Model		HY10W-110/260	HY10W-102/266	HY10W-108/281
Lightning Arrester Rating voltage virtual value(KV)		100	102	108
System nominal voltage virtual value(KV)		110	110	110
Continuous working voltage virtual value(KV)		78	79.6	84
DC(U1mA)Ref.Voltage no less than(KV)		145	148	157
Max.residual voltage Peak value(KV)	Teep ware impulse current	291	297	315
	Lighting impulse current	260	266	281
	Operating impulse current	221	226	239
2000 μs Square wave flux capacity(A)		600	600	600
4/10 μs Impulse current peak value(kA)		100	100	100
Max.Leaking current under 0.75DC ref.Voltage(μA)		50	50	50