10kV Zinc Oxide Lightning arresters (With disconnector)

Specifications: 10kV
Normal operating conditions for Lightning arresters:
a) Ambient temperature no higher than +40℃, no less than -40℃
b) Above sea level no higher than 1000m (order should be indicated if used in tableland area)
c) Power frequency not less than 48HZ, and no higher than 62HZ
d) Continuous power frequency voltage loaded on lighting arrester no higher than continuous working voltage of lighting arrester
e) Utmost wind velocity no higher than 35 m/s
f) Area where earthquake intensity less than 7 degree

Messy area should be indicated
Technical Performance
Product performance conforms to National standard technical requirement of GB11032-2000(equal to IEC 60099-4)
Main Technical Parameters(Performance meet the GB11032~2000 eqvlEC60099-4)

Using Area		Power Distribution(S)
Product Model		HY5WS—16.5/50L	HY5WS—17/50L	HY5WS—17.5/50L
Lightning Arrester Rating voltage virtual value(KV)		16.5	17	17.5
System nominal voltage virtual value(KV)		10	10	10
Continuous working voltage virtual value(KV)		12.7	13.6	13.6
DC(U1mA)Ref.Voltage no less than(KV)		25	25	25
Max.residual voltage Peak value(KV)	Teep ware impulse current	57.5	57.5	57.5
	Lighting impulse current	50	50	50
	Operating impulse current	42.5	42.5	42.5
2000 μs Square wave flux capacity(A)		75	75	75
4/10 μs Impulse current peak value(kA)		40	40	40
Max.Leaking current under 0.75DC ref.Voltage(μA)		30	30	30